Search This Blog Post

Samsung Galaxy S4 Zoom How to Install C101XWUANA1 Android 4.2.2 Jelly Bean Firmware How to Install

C101XWUANA1 Android 4.2.2 Jelly Bean Firmware Last Updated on 10-Feb-2014. A new official firmware released for the owners of  Samsung Galaxy S4 Zoom SM-C101 which is XWUANA1 4.2.2 Jelly Bean Firmware. The firmware recently rolled out by Samsung. The Galaxy S4 Zoom was released with Android 4.2.2 Jelly Bean and already received few regular firmware update. There is no news about any further android version update at this moment. We have already covered many firmware update for Galaxy S4 Zoom and here you can now download and install the latest C101XWUANA1 4.2.2 Jelly Bean Firmware. If you own the device and not yet updated this latest firmware, then update your device using our simple tutorial below. You can flash the firmware manually through Odin by following the below guide. Want to check out other firmware for the device, then check- official firmware for SM-C101.
As the Galaxy S4 Zoom  C101 released with Android 4.2.2 Jelly Bean and yet received Android 4.3 Jelly Bean or later android version, you can only expect few bug fixes and performance enhancement with this update. So, want to update your Galaxy S4 Zoom C101 to the latest XWUANA1 Android 4.2.2 Jelly Bean firmware? To install in official way, either you can go for  OTA (over the air) from Settings-About Phone-Software Update  or download firmware through the Samsung Kies utility. However, most of us prefer manual way to update official firmware. So, in this article you’ll find step by step manual guide to update the latest Android 4.2.2 XWUANA1 firmware on your Galaxy S4 Zoom C101 through Odin.

Important Note:

“The firmware is released only for the Samsung Galaxy S4 Zoom SM-C101 model, so don’t try this in any other android device. Check your device model number from Settings-About Phone. Also the tutorial is based on S4 Zoom dows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your phone”.

Android 4.2.2 Jelly Bean C101XWUANA1 Official Firmware Download List

Samsung rolled out the firmware for the following countries. The firmware which are unbranded or not locked to any carrier, no matter of which country or region, can be flashed on any Galaxy S4 Zoom SM-C101 model.

Pre-Requisites:

  • Check battery percentage, your device should have at least 60% battery power
  • Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
  • Backup important data and settings to external storage- follow this guide
  • Install USB driver for your device on your computer- Download Samsung USB Driver

Points to be noted:

  • If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
  • Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
  • After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.
All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.2.2 C101XWUANA1 official firmware on Galaxy S4 Zoom C101.

How to Install Android 4.2.2 Jelly Bean Official Firmware on Galaxy S4 Zoom C101 through Odin:

Samsung Galaxy S4 Zoom How to Install C101XWUANA1 Android 4.2.2 Jelly Bean Firmware How to Install
  1. Download Android 4.2.2 XWUANA1 Firmware for Galaxy S4 Zoom C101 from the above list
  2. Download Odin 3.09
  3. Switch off your phone and boot Galaxy S4 Zoom C101 into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
  4. Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
  5. Now connect your Galaxy S4 Zoom C101 to your computer via USB cable
  6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
  7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
  8. Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
  9. In Odin screen, click on PDA button and select the firmware file with .tar.md5 extension (The firmware file look something like: C101XXDLJ5_C101ODDDLI7_INU.tar.md5)
  10. Now, click on the Start button to begin the installation process, wait few moments.
  11. Once completed, you would see “PASS!” message in ID:COM port having green background
  12. Your phone should automatically reboot after completion
  13. You can now disconnect your phone from computer
  14. Finish
Congrats! you have completed the tutorial to update Android 4.2.2 Jelly Bean official firmware on Galaxy S4 Zoom SM-C101. Hope you successfully done the update process. If you followed everything as mentioned in the above tutorial, then your Galaxy S4 Zoom should now running on the latest Android 4.2.2 Jelly Bean build version XWUANA1. You can confirm the firmware update details from Settings-About Phone. If you stuck in any point or find any issue with the download link, then feel free to contact with us using the comment form below.

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

All Mobile Solution Headline Animator

All Mobile Solution

↑ Grab this Headline Animator

Please Log in