Upgrade Micromax A110 Canvas 2 To V3_120313_Update to Jelly Bean ROM Using Flash Tool
Requirements:
- Stock "ROM V3_120313_Update to Jelly Bean"
- A Flash Tool.
- A Windows Computer
- A Micromax A110 Device.
Steps:
- Install Drivers for Your Phone (You can use Micromax Drivers for that purpose.)
- Extract "Rom V3_120313_Update to Jelly Bean" in a folder in your PC.
- Open SP flash Tool after extracting in your PC.
- Open SP tool and then click on Scatter Loading option so that the program will for the Scatter loading file for your phone.
- For locating Scatter loading file you have to go to the folder where you have extracted V3_120313_Update to Jelly Bean ROM and then to the folder named S9081_MP_F4.1_B1_IN_MMX_1.10r and select the file named MT6577_Android_scatter_emmc which is the scatter file.
- Switch off your phone and make sure it is switched off.
- Then move on to the Flash Tool on your PC, go to Option and enable USB Mode by Clicking on it.
- After enabling it go to Options again and go to DA Download All then under it click on Speed and click High Speed.
- Go to the Firmware > Upgrade option you will find Download option click on it then Flash tool will look for your phone.
- After performing upper step connect your phone to your PC. The Flash Tool will start the flashing of your phone and this process can be seen by a yellow progress bar present at the bottom of the Flash Tool.
(Note: Don’t disconnect your phone or interrupt in the middle of the process otherwise your phone will be brick permanently. Ensure everything before the process of flashing your phone.)
- Green ring will be displayed when the process will be completed as shown above.
- Disconnect your phone and Now you have successfully upgarde your Canvas 2 to Jelly Bean...... Enjoy
No comments:
Post a Comment