All Mobile Solution

Dear Friends This Models(i9300&N7100) Boot Repair Step One i Already Posted Plz Check This Link
IF YOU WANT MAKE A SAMSUNG S3(i9300)BOOT CARD(LOOK HERE)
1)First Create Boot Card
2)Download teraterm-4.78
teraterm-4.78
3)Connect Spt Box Also Take One Micro Uart Cable
4)Open teraterm-4.78 (look the picture)

Go To Device Manager Check Spt Port Number
Open teraterm-4.78,Now New Window Apper.
Select Spt Serial Port (look the picture)

After Select The Serial Port Press Ok Button
Next Go To Setup Click Serial Port Option
Select Baud Rate 115200 Then Press Ok Button

Insert Boot Card To Phone
Connect Spt Via Uart Cable
Then Insert Battery Next Hold Power Button Wait For Minutes
Quote:

pit_check_integrity: invalid pit.(0x0)
pit_check_integrity: invalid pit.(0x0)
update_guid_partition_table: There is no pit binary.
fsd_reclaim 1283: MST is not recognized(mst.magic=0x0)
fsd_reclaim 1284: MST is not recognized
fsd_reclaim 1599: Error(nErr=0x0)
fsd_reclaim 1604: j4fs_rw_start is set to default value(128KB)
j4fs_open 153: Error(nErr=0x40000000)
j4fs_read_file_bootloader 355: j4fs panic
load_j4fs_param: 'param.j4fs' does not exist, make new one..
j4fs_write_file_bootloader 184: j4fs panic
fail
j4fs_read_file_bootloader 355: j4fs panic
load_j4fs_param: debug level file does not exist..*INCORRECT!*
init_fuel_gauge: battery is not detected, do not init fuelgauge
init_microusb_ic: MUIC: CONTROL1:0x1b
init_microusb_ic: MUIC: CONTROL1:0x1b
init_microusb_ic: MUIC: CONTROL2:0x3b
init_microusb_ic: MUIC: CONTROL2:0x3a
PMIC_ID = 0x2
PMIC_IRQSRC = 0x0
PMIC_STATUS1 = 0x10
PMIC_STATUS2 = 0x0
PMIC_PWRON = 0x2
PMIC_IRQ1 = 0x27
PMIC_IRQ2 = 0x0
s5p_check_keypad: keypad value=0x0
s5p_check_reboot_mode: INFORM3 = 0 ... skip
s5p_check_upload: MAGIC CODE=d1b0f038
microusb_get_attached_device: STATUS1:0x3c, 2:0x0
s5p_check_download: update mode=0
j4fs_read_file_bootloader 355: j4fs panic
s5p_check_tzsw: invalid tzsw type! dummy?
scr_draw_image: draw 'download_error.jpg'...
j4fs_read_file_bootloader 355: j4fs panic
read_param_file: 'download_error.jpg' j4fs read failed!
fimd_div:13, div:1, FB_SOURCE_CLOCK:800000000, FB_PIXEL_CLOCK:57153600
a2, 60, 90,

After The Boot Repair Phone Must Trun On But Just For Light Nothing Show The Display.Dont Worry Put The Phone Download Mode Now Phone Enter Download Like This Picture
open spt software use any version flash file.but remmber must use repartition option then flash it
are you used odin software must use mx pit file&repartition option
after the flash phone must powered but imei is damaged just rebuild imei via z3x.
Quote:

TN default
<OK>
<OK>
[DVFS] INT(1) : 0
DRAM Type : LPDDR2 8G
[DVFS] MIF(3) : 0
[EPLL][VPLL][CLK_DIV] OK
<OK>
[LOCK SW/HW]ARM:0/0 INT:0/0 G3D:0/0 MIF:0/0 SHIFT:0/0
[DVFS] ARM(0) : 5
[DVFS] INT(1) : 0
[DVFS] G3D(2) : 0
[DVFS] MIF(3) : 0
[SD_INIT
SDMMC_HighSpeedONE]
SD_READ: 20000 20000 0x40008000 -> 668484 usec
<OK>
Inp32(uAddr) : 0xea00007e
FW Booting
[Patch Stop] This is not Rom Code.

any one faced the error while boot repair
this casue not software bad EMMC
this phone cant repair with any jtag,must change the EMMC

Download-Here

Miracle Eagle Eye v1.59 official Mediafire Download Link
Miracle_Eagle_Eye_v159_Miracle-Team

ORT - JTAG UPDATE
[27 September 2013]

Description :

Samsung SGH-T769 Repair Boot Supported

Release Notes and Files:

Samsung_SGH_T769.dll
- Repair Dead Boot

Repairing Samsung SGH-T769

Connect Battery and USB Cable
Download DLL File "Samsung_SGH_T769.dll"
Place in phones folder
Select Model
Click Repair

ORT Team News and Blog :

ORT-JTAG - The Real JTAG'gers

Tired downloading/installing KIES only for last drivers?
SO this thread for you

Download and Install Samsung's latest USB drivers & ADB Interface: February 2013!

SAMSUNG USB Drivers for Mobile Phones (x86 & x64) v1.5.18.0 ===> Click HERE

Step by step installation manual:
- Uninstall previous version from control panel and reboot pc
- Install new Drivers and again reboot pc
- Turn ON “USB debugging” mode on your Android device
- Connect you phone and enjoy

Here Samsung Android ADB interface Drivers from MS:
DOWNLOAD Driver v2.9.507.0 ===> Click HERE

How to Root I9082 / I9082L -
STEP BY STEP rooting manual for GSM-Hosting users

Just follow this simple steps:

1. Step

- Download Samsung USB drivers ----> Click HERE
- Download ODIN 3.04 from ----> Click HERE
- Download i8092 recovery image prerooted ----> Click HERE
- Download SuperSu Last version ----> Click HERE

2. Step

- Turn off phone, then switch to download mode:
press together [volume down]+[home button]+[power button] (all at once),
press [volume up] for comfirm download mode.
- Connect usb cable, install drivers.

3. Step

- Run Odin 3.04, ticked 2 option F.reset times+auto reboot,
- Extract CWM-touch_i9082_chotu.tar.zip !Select PDA and browse to where you have extracted CWM-touch_i9082_chotu.tar.md5
and select it

4. Step

- Odin should show device under 1 of ID:COM port.(if this not happends repeat from STEP 2)
- Press START.
- Phone should power on after flashing complete.

5. Step - ROOTING:

- Copy Downloaded SUperSU to externel sdcard (NOT INTERNAL ! )
- Power off your phone, after press [Vol up] + [Power] + [Home button] (all at once)
- SelectInstall zip from sdcard --->choose zip from sdcard ---> scroll down and select Fix Recovery.zip and
again choose zip from sdcard and flash UPDATE-SuperSU-v1.05.zip

Done ! And you are ready to go

thanks goes to chotu.

How to Root I8190 / I8190N / I8190L / I8190T Galaxy S3 Mini -
STEP BY STEP rooting manual for GSM-Hosting users

I have some good news today.
Official recovery files from CWD i found.

What we have?
Simple, now we hav easy and fast way for root any I8190 L, I, T, N Galaxy S3 Mini.
Just Follow Manual now.

1. Step

- Download Samsung USB drivers ----> Click HERE
- Download ODIN 3.04 from ----> Click HERE
- Download recovery-clockwork-touch-6.0.2.7-golden.tar.md5.zip recovery image from here ------> Click HERE!
- Download SuperSu Last version ----> Click HERE

2. Step

- Turn off phone, then switch to download mode:
press together [volume down]+[home button]+[power button] (all at once),
press [volume up] for comfirm download mode.
- Connect usb cable, install drivers.

3. Step

- Run Odin 3.04, ticked 2 option F.reset times+auto reboot,
- Extract ecovery-clockwork-touch-6.0.2.7-golden.tar.md5.zip !Select PDA and browse to where you have extracted ecovery-clockwork-touch-6.0.2.7-golden.tar.md5
and select it

4. Step

- Odin should show device under 1 of ID:COM port.(if this not happends repeat from STEP 2)
- Press START.
- Phone should power on after flashing complete.

5. Step - ROOTING:

- Copy Downloaded SUperSU to externel sdcard (NOT INTERNAL ! )
- Power off your phone, after press [Vol up] + [Power] + [Home button] (all at once)
- Select Install zip from sdcard --->choose zip from sdcard ---> scroll to and open folder where located UPDATE-SuperSU-v1.05.zip-> choise UPDATE-SuperSU-v1.05.zip->
comfirm - YES - Install Update UPDATE-SuperSU-v1.05.zip.

Done ! And you are ready to go

thanks goes to chotu.

You can also use old method for root i8190 - prerooted firmware.
After few days i will update thread and will add link for prerooted Firmware.
i8190 prerooted - will be HERE.
i8190 prerooted - will be HERE.

Android Tablet (CPU A10 - A13)WIPE ROM EASY

III-Solved Hang & Google Password--III
100% Tested By Me
Related Software Problem Solved

DownLoad : WIPE ROM EASY A10 - A13.rar By azimbahar ..::One-Man::..

Wipe Rom = Wipe Data and Wipe Cache = Factory Reset = Data Lose

Supported - Wipe Rom CPU A10 - A13

Example - Just Flowing The Image .

How To Wipe CPU A10 - A13

III---Gide---III

The video below, posted to YouTube by Dany Lisianski, shows a method of accessing contacts, photos, send message, and send email by making a FaceTime call.

*Note: Disabling Siri on the launch screen will prevent this.

Steps to reproduce:
1. Make a phone call (with Siri / Voice Control).
2. Click the FaceTime button.
3. When the FaceTime App appears, click the Sleep button.
4. Unlock the iPhone.
5. Answer and End the FaceTime call at the other end.
6. Wait a few seconds.
7. Done. You are now in the phone app

http://www.youtube.com/watch?v=fVpfdYYy1Dg

Samsung Galaxy Note II

The Samsung Galaxy Note II is an Android smartphone manufactured by Samsung and noted for its combination of a large display, 5.55-inch (141 mm) measured diagonally, and software optimized for an integral self-storing stylus. Because the display places the device at the large end of the smartphone and small end of the tablet size ranges, the Galaxy Note II has been called a hybrid of a phone and tablet, or phablet.
Succeeding the Samsung Galaxy Note, the Note II features a 1.6 GHz quad-core processor, 720p resolution display, 2 GB of RAM, and storage capacity up to 128 GB — when using a 64 GB microSD card with the projected 64 GB model.
At the time of its launch, the Galaxy Note II was the first Samsung phone to employ Android 4.1 Jelly Bean as its standard operating system.

Feature and Configuration

N7100XXDMB2_VFG - XX personalization Italy

Samfiles

Samsung Galaxy Note II (GT-N7100) –User Manual/Guide
Samsung Galaxy Note II (GT-N7100) –User Manual/Guide

Samsung Galaxy Note II Repair Manual
Samsung Galaxy Note 10.1 Repair Manual - iFixit

Galaxy Note 2 - N7100 Complete Disassembly & Assembly
http://www.youtube.com/watch?v=UT-2zrZ_aNo

Steps:-
1. Phone must be on
2. Use uart cable(RJ-45)
3. Connect Cable to Phone
4. Select S5222
5. Then click user

My Result Log Here

Selected com port: COM3
Selected speed port: 921600
Phone must be ON
Use UART cable E210 or J750
Phone IMEI: 35543305394359/00
Phone SN: RZ1D410MPC
Phone SN: S3802DDMC3
Phone user code: 00000
Read user code - ok
Elapsed time: 6 second, sw ver: 3.5.0040

Other Way Flash Ur Phone
FLASH FILE
s3802ddmc3_bin & csc - Download - 4shared - Chaurasiya Brothers

FLASH TOOL
flashtool_e2_v4.102 - Download - 4shared - Chaurasiya Brothers

Note:- Driver Inside Flashtool Folder

Whatsapp Messenger is a Smartphone Messenger accessible for Android and different cell phones. Whatsapp uses your 3g or Wifi (when open) to message with friends and family. Switch from SMS to Whatsapp to send and pick up messages, pictures, sound notes, and film messages. Above all else year FREE! ($0.99 Usd/year after)

WHY USE WHATSAPP:

★ NO HIDDEN COST: Once you and your partners download the demand, you can use it to visit to the degree that you require. Send a million of messages a day to your colleagues gratis! Whatsapp uses your Internet companionship: 3g or edge or Wi-Fi when open.

★ MULTIMEDIA: Send Video, Images, and Voice notes to your partners and contacts.

★ GROUP CHAT: Enjoy group conversations with your contacts.

★ NO ANY INTERNATIONAL CHARGES: There is no added cost to send an all inclusive message, there is no upkeep to send Whatsapp messages all around. Visit with your colleagues all over the place all through the planet furnished that they have Whatsapp Messenger authorized and stay far from those troublesome worldwide SMS costs.

★ SAY NO TO PINS AND USERNAMES: Why even inconvenience expecting to review yet a substitute PIN or username? Whatsapp works with your phone number, much the same as SMS may, and arranges flawlessly with your existing phone address book.

★ NO NEED TO LOG In/out: No more confuse about getting logged off from a substitute machine or device. With push warnings Whatsapp is ALWAYS ON and ALWAYS CONNECTED.

★ NO NEED TO ADD BUDDIES: Your Address Book is used to instantly interface you with your contacts. Your contacts who starting as of late have Whatsapp Messenger will be promptly indicated.

★ OFFLINE MESSAGES: Even accepting that you miss your push notices or turn off your phone, Whatsapp will save your messages detached from the net until you recuperate them all through the accompanying procurement use.

Recent changes:
2.11.67 / 2013-SEP-11
2.11.63 / 2.11.64 / 2013-SEP-10
2.11.61 / 2.11.62 / 2013-SEP-09
2.11.59 / 2013-SEP-07
2.11.57 / 2.11.58 / 2013-SEP-06
2.11.55 / 2.11.56 / 2013-SEP-05
2.11.52 / 2013-SEP-04
2.11.50 / 2013-SEP-03
2.11.49 / 2013-AUG-30
2.11.45 / 2.11.47 / 2013-AUG-29
2.11.44 / 2013-AUG-28
2.11.43 / 2013-AUG-27
2.11.40 / 2.11.41 / 2.11.42 / 2013-AUG-26
― miscellaneous bug fixes, translations and improvements

What's New
voice message recording bug fix for Samsung phones. restarting the phone is required

And the next one is WeChat application. This application can run on android, iOS, Android, iPhone, iPad, Windows Phone and Symbian. At WeChat application provided with the sharing of unique and interesting features. What are the features of this app? Among them are Shake, Voice Messaging, Lock Arroud, Drift Bottle, Facebook Comment and various types of motion are funny and interesting. Another feature that is similar to that of WhatsApp.
Both of the above application must have been very familiar to you. However, if it is felt that more use is superior because it has WeChat different types of features, which certainly favored by the users. But do not know if you, you prefer to use application which.

Model Blackberry 9900

Problem: No Power / Not Shorted

Action Taken: Replace New Battery = Negative
Mild Reheat Memmory IC & CPU= All is Well.

Screen Shots

Alcatel SPD/Spreadtrum Operations Supported!!

read Info
read Unlock Code First In The World
read Firmware First In The World
Write Firmware
IMEI rebuild/repair First In The World
Format/reset ffs First In The World

!!Pinout Phone Ready!!

These IPSW files are hosted on Apple’s servers and are intended for manual installation through iTunes.

Infinity BEST v1.72 , Lumia WP7x : Direct Unlock, BL Unlock, User Data Recovery

Wp7x new features

Service operations :
- Added BootLoader unlock *
- Added BootLoader restore *
- Added Unlock (via Patch) *
- Production Data edit ( PC,PSN,BTMAC,WiFiMAC )
- Backup/Restore Security ( NV/EFS/DPP/PMM )

Flash Read :
- Read partitions
- Custom read

User Data operations :
- Read USER partition
- Restore User Data from WPOS USER
- Gallery (Photo/Video/Records)
- Gallery (Sync content from Zune)
- Documents (MS Office Excel, Word, PowerPoint)

Misc :
- Restart phone from eMMC to normal
- Restore bootloader
- Restore SimLock patch
- Automatic connect / Phone identification

BB5 and other

- Navi updated
- Added latest Amber updates for WP8x
- Added latest WP8x products

- Service operations improved
- XG223 factory RPL writing improved
Fixed SDD key write
Product Code Update

- User Data operations improved
- Gallery extraction from FullFlash for S40 (BB5/XGOLD)
Support damaged files/names (fiX-) added
User Data extraction from eMMC revised
- Removed session restrictions for RAPUx
- Improved "garbag
e" data detection during extraction
- Reading speed up

- Misc
Some changes in GUI (Wp7X-)
Fixed some major bugs
Ini updated and revised
Stuff Files updated

Supported WP7x Products :
(*) Supported products for BL and Unlock :
RM-801 (Lumia 800)
RM-803 (Lumia 710)
RM-809 (Lumia 710)
RM-819 (Lumia 800)

(**)Supported products for User Data extraction :
RM-801 (Lumia 800)
RM-802 (Lumia 800)
RM-803 (Lumia 710)
RM-809 (Lumia 710)
RM-808 (Lumia 900)
RM-819 (Lumia 800)
RM-823 (Lumia 900)
RM-835 (Lumia 610)
RM-836 (Lumia 610)
RM-849 (Lumia 610)
RM-889 (Lumia 510)
RM-898 (Lumia 510)
RM-923 (Lumia 505)

New update can be downloaded from HERE

Special Thanks to : Bph&co (Genie Projects) for Lumia Patch Unlock!

Samsung Tool 15.7 - Small update but First in the world & hot phones

Added:

- support Samsung SGH-i9506 (SAFE Direct Unlock & SAFE OneClick Imei repair* beta, flashing) - first in the world
- support Samsung SGH-i9507 (SAFE Direct Unlock & SAFE OneClick Imei repair* beta, flashing) - first in the world
- support Samsung GT-N5100 (Direct Unlock, OneClick Imei, Network repair, flashing) thnks to xcachorrox
- support Samsung GT-SM-T311(Direct Unlock, OneClick Imei, Network repair, flashing) thnks to alex_mkd

Direct link

Version:iTools 2013 0924
Size:3.06M(zip)

Fully supports ios7

Download link

Samsung I9105 imei repair don BY SAGAR NADEEM

How to Root I9105 / I9105P Galaxy2 PLUS -
STEP BY STEP rooting manual for GSM-Hosting users

Just follow this simple steps:

1. Step

- Download Samsung USB drivers ----> Click HERE
- Download ODIN 3.04 from ----> Click HERE
- Download CWMtouch-i9105_chotu.tar.md5.zip recovery image from here ------> Click HERE!
for other type fw (Indian) download this recovery image ---> Click HERE!
- Download SuperSu Last version ----> Click HERE

2. Step

- Turn off phone, then switch to download mode:
press together [volume down]+[home button]+[power button] (all at once),
press [volume up] for comfirm download mode.
- Connect usb cable, install drivers.

3. Step

- Run Odin 3.04, ticked 2 option F.reset times+auto reboot,
- Extract CWM-touch_i9082_chotu.tar.zip !Select PDA and browse to where you have extracted CWM-touch_i9105_chotu.tar.md5 or CWM-touch_i9105_Indian_chotu.tar.md5
and select it

4. Step

- Odin should show device under 1 of ID:COM port.(if this not happends repeat from STEP 2)
- Press START.
- Phone should power on after flashing complete.

5. Step - ROOTING:

- Copy Downloaded SUperSU to externel sdcard (NOT INTERNAL ! )
- Power off your phone, after press [Vol up] + [Power] + [Home button] (all at once)
- SelectInstall zip from sdcard --->choose zip from sdcard ---> scroll down and select Fix Recovery.zip and
again choose zip from sdcard and flash UPDATE-SuperSU-v1.05.zip

Hacker winocm, who previously demonstrated a jailbreak of the iPhone 5 on iOS 6.1.4, has tweeted with a minor status update.

"The status of the jailbreak is pretty much: it needs work but its almost there. (For a very small subset of devices.)"

At this point in time its unclear which devices winocm is planning to support; however, it's likely that the iPhone 5 will be one of them. In early September, he tweeted photos of Cydia running on an iOS 6.1.4 iPhone 5. Previously, he also indicated the successful jailbreak of the iPhone 4 so that's another device that could be supported.

Source:iclarified

Added I8262, I8552, I9152, I9205, S7270, S7270L FULL Support (Unlock, IMEI, Flash, etc...)

Added I747, T999 new security Unlocking support - No downgrade needed.

Is highly recommended to use latest NsPro version!

Latest NsPro version is available for download:
-On NsTeam Website: : : NsPro Downloads: :
-On NsPro Support area

states of the phone is dead ...

flashing with atf ,

flashing is ok but one error is show (lcd test failed )

VBATT Powering Down <<<<
VBATT Powering Up >>>>
SET VCCIO Level Done
SET BSI Load Done

Booting Phone...
CPU ID Response: A200341100
CPU Type: XG110 2.1B
Phone Booted at after First attempt...

************************************************** ****
TIME STARTS HERE
************************************************** ****

Sending PBL 19456 bytes...
PBL Successfully Sent...

Sending SBL 65024 bytes...
SBL Successfully Sent...

Flash Chip Manufacturer: STMicroelectronics
Flash Chip Type: M58WR064 64 Mbit (4Mb x 16) NOR
Extended Information: Multiple Bank / Burst / 1.8v

Processing Image File: C:\Program Files\Nokia\Phoenix\Products\RM-769\rm769_007.200

FIRMWARE Image Found...
Number of Sections: 03
FIRMWARE Certificate Block Sent Successfully...
Processing Section 01 of 03
FIRMWARE Erase Block: 0x00000000~0x0001FFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 24576 bytes
Data Checksum: F5BE
Uploading Data Blocks to phone...
FIRMWARE Data Blocks uploaded to phone...
Processing Section 02 of 03
FIRMWARE Erase Block: 0x00800000~0x00BFFFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 4128768 bytes
Data Checksum: BFB7
Uploading Data Blocks to phone...
FIRMWARE Data Blocks uploaded to phone...
Processing Section 03 of 03
FIRMWARE Erase Block: 0x00C5D000~0x00E5FFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 1697536 bytes
Data Checksum: 2B05
Uploading Data Blocks to phone...
FIRMWARE Data Blocks uploaded to phone...
Start Data Verification... (Please wait)
Data Verification Successful...

Processing Image File: C:\Program Files\Nokia\Phoenix\Products\RM-769\rm769_007.20mh

PPM Image Found...
Number of Sections: 01
PPM Certificate Block Sent Successfully...
Processing Section 01 of 01
PPM Erase Block: 0x00100000~0x0061813E
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 5341504 bytes
Data Checksum: 47D8
Uploading Data Blocks to phone...
PPM Data Blocks uploaded to phone...
Start Data Verification... (Please wait)
Data Verification Successful...

Processing Image File: C:\Program Files\Nokia\Phoenix\Products\RM-769\rm7690_nai07.20mh_nlt

CONTENT Image Found...
Number of Sections: 01
CONTENT Certificate Block Sent Successfully...
Processing Section 01 of 01
CONTENT Erase Block: 0x00E60000~0x00F49FFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 958464 bytes
Data Checksum: BB37
Uploading Data Blocks to phone...
CONTENT Data Blocks uploaded to phone...
Start Data Verification... (Please wait)
Data Verification Successful...

Exit Flash Mode Done...
Time Elapse : 00:04:32

************************************************** ****
You must Factory Reset the phone to enable the
ringtones and other customized settings to work
************************************************** ****

Waiting For Phone to go Online...

5, 4, 3, 2, 1...
MCU: V 07.20 30-03-12 RM-769 (c) Nokia
IMEI: 353654055460122
Product Serial Number: 3D65DAFBI
Product Code : 059J2D0
Module Code : 0204874
Basic Production Code: 059P5G1
PPM SW Version : V 07.20 30-03-12 RM-769 (c) Nokia MH
ADSP Version : p+V 07.20\n30-03-12\nRM-769\n(c) NMP\nmh_nlt
MCU SW Version : V 07.20 30-03-12 RM-769 (c) Nokia
HW Version : 3000
UEM Version : 1328
UPP Version : 8850
LCD Version : UNKWN: IDs: 00:00:00
********** SIMLOCK INFO **********
CONFIG_DATA : 0010100000000000
PROFILE_BITS : 0000000000040002
ASIC : 11
PROVIDER : Default Test Operator

Block [1] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [2] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [3] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [4] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [5] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [6] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [7] 1:Open 2:Open 3:Open 4:Open 5:Open
ST_LCD_TEST : FAILED

Phone Cannot Enter Normal Mode if LCD
is Damaged or LCD is not Properly
Connected to the Main PCB

FACTORY SET TO : Full Factory Set
OK
FACTORY SET TO : User Data
OK
FACTORY SET TO : Leave Factory
OK
FACTORY SET TO : Service Center
OK
FACTORY SET TO : Software Upgrade
OK
FACTORY SET TO : Production Tune
OK

apply this jumber.. 100% working.....