Miracle Advanced Android Tool Addon Miracle Box Tested this

Miracle Advanced Android Tool Add on Miracle Box
Read Info
--------------------------------------------
Starting..
Searching Phone ...( Found )
Reading Info...
--------------------------------------------
Manufacturer : alps
Model : hexing15_6626_gb2
Build Id : LEMON-P7-20130124-1730-008_8053-1C_A999_MG_DVGA_4G&2G
Id : GRK39F
BaseBand Ver. : MAUI.11AMD.W11.50.SP.V18.F1, 2012/10/23 16:00
Android Ver. : 2.3.6
Region : US
Locale : en
Chipset :
Hw Version : mt6575
Cpu : ARMv7
Cpu Implementer : 0x41
Cpu Architecture : 7
Cpu Variant : 0x2
Cpu Part : 0xc09
Cpu Revision : 10
Kernal Ver. : 2.6.35.7
--------------------------------------------
Super su Apk : Not Installed
BusyBox : Not Installed
Root Status : Not Rooted
--------------------------------------------
All Done..
Operation Log Saved..

Remove Google Account

Nokia 111 Keypad 1,4,7,* is not working solution

If Nokia 111 keypad is not working you can solve keypad problem in nokia 111 by following these steps that are given in in this post. Look at the diagram bellow and follow these steps.

Keep in mind after dis assembly of Nokia 111 look at the whole mother board for carbon water damages and rust. Make it clean with electronics cleaner and apply heat so that it can be dry smoothly. Do not apply much heat because much heat can harm your skin and may can damage the mother board.
In above diagram you can see a resistance is identified. Remove it and it will solve keypad problem if keys are working duplicate. Nokia 111 keypad problem solution.

Nokia 111 Network Problem Solution Jumper Ways

if you have network low signals problem in Nokia 111 you can fix this problem with a few steps as given in diagram bellow.Nokia 111 network problem can be cause of missing components or water damages.In this problem would no be able to make Voice calls or it may drop call during calls automatically.

in above diagram there are two different color lines that shows full track of components and parts which are used in network signal function.Check all these track and parts to solve Signal problem in Nokia 111 and if some path missing apply jumpers as given in above diagram.
You can resold PA also to fix network problem in Nokia 111.we will soon update this post with P.A jumpers.so that you can solve network problem without power amplifier.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Nokia 111 light problem solution with jumpers

Nokia 111 light problem can be cause of water damage in it. Carbon or burn parts can also be the reason of light problem in nokia 111.Due to light problem we can not see the display of nokia 111.
To solve nokia 111 light problem we can make these jumpers as given in above diagram to solve reparing lcd display light in nokia 111. Keypad light problem, lcd light problem, display light solution in Nokia 111.

After dis assembly of nokia 111 you have to check if there is some carbon or rust. Clean whole the mother board of nokia 111 with electronic cleaner for water damages.Apply heat with hot air and keep in mind it should not be too much. Because it can be dangerous for your skin and can also damage the mother board of nokia 111.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Nokia 111 light problem solution with jumpers

Nokia 111 light problem can be cause of water damage in it. Carbon or burn parts can also be the reason of light problem in nokia 111.Due to light problem we can not see the display of nokia 111.
To solve nokia 111 light problem we can make these jumpers as given in above diagram to solve reparing lcd display light in nokia 111. Keypad light problem, lcd light problem, display light solution in Nokia 111.

After dis assembly of nokia 111 you have to check if there is some carbon or rust. Clean whole the mother board of nokia 111 with electronic cleaner for water damages.Apply heat with hot air and keep in mind it should not be too much. Because it can be dangerous for your skin and can also damage the mother board of nokia 111.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Nokia 111 light problem solution with jumpers

problem is not lcd display light and keypad light also not getting on lighten.it is common fault of lcd pin 2 and 3.in diagram given bellow you can find these two lines with color so make jumper as shown in diagram.
 

Nokia 111 light problem solution with jumpers
on lcd prints strip can be scratched vary carefully and slightly so that it can be sold easily and then you can make jumper as i told above.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Nokia 105 Battery Terminal Points Damage Ways Problem Solution

Nokia 105 Battery Terminal Points Damage Ways Problem Solution Nokia 105 Battery Terminal Points Damage Ways Problem Solution if in nokia 105 during changing battery terminal points you have loss battery points then you can solve this problem with this diagram bellow posted in this post.

nokia 105 dead set problem , nokia 105 battery socket problem , nokia 105 dead problem , 105 dead problem , nokia 105 battery connector , Nokia 105dead jumper , 105 battery connector

Cherry Mobile d11 V2 Dead Solved Solution

Piranhabox Cherry Mobile d11 V2 Dead Solved Solution INside

Quote:

Scaning SPD&WT Pinouts,Connect the phone and Power On it . D+:9 D-:8 Gnd:1 Spread Pinout Setting Ok. Searching USB to Serial Port... SU2Serial Port: COM141 Done. Infor: Spreadtrum Boot Block version 2.0 Initialize boot10... BootLoad Error. ID: 3283 Pinout Setting Ok. Searching USB to Serial Port... SU2Serial Port: COM141 Connecting to Phone,Wait.. Done. Infor: Spreadtrum Boot Block version 2.0 Initialize boot10... BootLoad Error. ID: 3283

open phone rehot flash ic
then readinfo format

Quote:

Scaning SPD&WT Pinouts,Connect the phone and Power On it . D+:9 D-:8 Gnd:1 Spread Pinout Setting Ok. Searching USB to Serial Port... SU2Serial Port: COM141 Connecting to Phone,Wait.. Done. Infor: Spreadtrum Boot Block version 2.0 Initialize boot10... CPU type: 6600L/WT6226 Flash type: NOR Pinout Setting Ok. Searching USB to Serial Port... SU2Serial Port: COM141 Connecting to Phone,Wait.. Done. Infor: Spreadtrum Boot Block version 2.0 Initialize boot10... CPU type: 6600L/WT6226 Flash type: NOR Formating... Start Addr:F20000 Size:C0000 Format Completed.

done

Sony Xperia L C2105 Flash Repair Done With Factory Firmware

Sony Xperia L ( C2105 ) Flash Repair Done With Factory Firmware

Here Flash Log:-

Code:

16/033/2013 12:33:42 - INFO  - <- This level is successfully initialized
16/033/2013 12:33:42 - INFO  - Flashtool Version 0.9.11.0 built on 2013-06-04 22:50:00
16/033/2013 12:33:42 - INFO  - Device disconnected
16/034/2013 12:34:39 - INFO  - Selected Sony Xperia L (C2105) / 15.3.A.0.26 / Philippines
16/034/2013 12:34:39 - INFO  - Preparing files for flashing
16/034/2013 12:34:53 - INFO  - Please connect your device into flashmode.
16/035/2013 12:35:53 - INFO  - Device connected in flash mode
16/035/2013 12:35:54 - INFO  - Opening device for R/W
16/035/2013 12:35:54 - INFO  - Reading device information
16/035/2013 12:35:54 - INFO  - Phone ready for flashmode operations.
16/035/2013 12:35:54 - INFO  - Current device : C2105 - ZH8000Z963 - 1271-3303_R5A - 1269-5420_15.0.A.1.36 - WORLD-i_15.0.A.1.36
16/035/2013 12:35:54 - INFO  - Start Flashing
16/035/2013 12:35:54 - INFO  - Processing loader
16/035/2013 12:35:54 - INFO  -     Checking header
16/035/2013 12:35:54 - INFO  -     Flashing data
16/035/2013 12:35:54 - INFO  - Loader : S1_Root_dbe9 - Version : loader_MSM8X30_10 / Bootloader status : ROOTABLE
16/035/2013 12:35:54 - INFO  - Processing partition-image.sin
16/035/2013 12:35:54 - INFO  -     Checking header
16/035/2013 12:35:54 - INFO  -     Flashing data
16/035/2013 12:35:54 - INFO  - Processing kernel.sin
16/035/2013 12:35:54 - INFO  -     Checking header
16/035/2013 12:35:54 - INFO  -     Flashing data
16/035/2013 12:35:56 - INFO  - Processing fotakernel.sin
16/035/2013 12:35:56 - INFO  -     Checking header
16/035/2013 12:35:56 - INFO  -     Flashing data
16/035/2013 12:35:57 - INFO  - Processing modem.sin
16/035/2013 12:35:57 - INFO  -     Checking header
16/035/2013 12:35:57 - INFO  -     Flashing data
16/036/2013 12:36:05 - INFO  - Processing rpm.sin
16/036/2013 12:36:05 - INFO  -     Checking header
16/036/2013 12:36:05 - INFO  -     Flashing data
16/036/2013 12:36:05 - INFO  - Processing ftma.sin
16/036/2013 12:36:05 - INFO  -     Checking header
16/036/2013 12:36:05 - INFO  -     Flashing data
16/036/2013 12:36:06 - INFO  - Processing ramdumper.sin
16/036/2013 12:36:06 - INFO  -     Checking header
16/036/2013 12:36:06 - INFO  -     Flashing data
16/036/2013 12:36:06 - INFO  - Processing cache.sin
16/036/2013 12:36:06 - INFO  -     Checking header
16/036/2013 12:36:06 - INFO  -     Flashing data
16/036/2013 12:36:07 - INFO  - Processing system.sin
16/036/2013 12:36:07 - INFO  -     Checking header
16/036/2013 12:36:07 - INFO  -     Flashing data
16/038/2013 12:38:49 - INFO  - Processing userdata.sin
16/038/2013 12:38:49 - INFO  -     Checking header
16/038/2013 12:38:49 - INFO  -     Flashing data
16/038/2013 12:38:54 - INFO  - Ending flash session
16/038/2013 12:38:54 - INFO  - Flashing finished.
16/038/2013 12:38:54 - INFO  - Please unplug and start your phone
16/038/2013 12:38:54 - INFO  - For flashtool, Unknown Sources and Debugging must be checked in phone settings
16/038/2013 12:38:54 - INFO  - Device connected in flash mode
16/039/2013 12:39:13 - INFO  - Device disconnected
16/039/2013 12:39:57 - INFO  - Device connected in flash mode
16/040/2013 12:40:38 - INFO  - Please connect your device into flashmode.
16/040/2013 12:40:39 - INFO  - Opening device for R/W
16/040/2013 12:40:39 - INFO  - Device connected in flash mode
16/040/2013 12:40:39 - INFO  - Reading device information
16/040/2013 12:40:39 - INFO  - Phone ready for flashmode operations.
16/040/2013 12:40:39 - INFO  - Current device : C2105 - ZH8000Z963 - 1271-3303_R5A - 1269-5420_15.0.A.1.36 - WORLD-i_15.0.A.1.36
16/040/2013 12:40:39 - INFO  - Processing loader
16/040/2013 12:40:39 - INFO  -     Checking header
16/040/2013 12:40:39 - INFO  -     Flashing data
16/040/2013 12:40:40 - INFO  - Loader : S1_Root_dbe9 - Version : loader_MSM8X30_10 / Bootloader status : ROOTABLE
16/040/2013 12:40:40 - INFO  - Start Reading unit 000008B2
16/040/2013 12:40:40 - INFO  - Reading TA finished.

Tested By Me


Here Flasher Link:-

Flashtool-0.9.11.0-windows


Here Firmware Link:-

Sony Xperia L (C2105)_15.3.A.0.26_Philippines.part1


Sony Xperia L (C2105)_15.3.A.0.26_Philippines.part2




Or


C2105_15.0.A.2.17_PT. TELETAMA ARTHA MANDIRI.part1


C2105_15.0.A.2.17_PT. TELETAMA ARTHA MANDIRI.part2