Samsung Galaxy Tab 2 7.0 GT-P3100- How to Install P3100XWDNA1 Android 4.2.2 Jelly Bean Firmware

P3100XWDNA1 Android 4.2.2 Jelly Bean Firmware Last Updated on 26-Feb-2014. Samsung Galaxy Tab 2 7.0 GT-P3100 (3G+WiFi) recently received the latest XWDNA1 Android 4.2.2 Jelly Bean official firmware update. Samsung started rolling out an OTA update about the firmware. The latest firmware build version is P3100XWDNA1. The Galaxy Tab 2 7.0 was released in the beginning of the year 2012 with Android 2.3.6 Gingerbread Firmware and was schedule upgradable to Android 4.1 Jelly Bean. Samsung started pushing  Android 4.2.2 Jelly Bean on Galaxy Tab 2 7.0 P3100 from the month of July 2013. Here we have the latest available firmware for the device. If you not yet updated your device to this latest available firmware, then do it now by following the tutorial below. The below guide will help you to download and install the P3100XWDNA1 Android 4.2.2 Jelly Bean Firmware manually through Odin. You can also check the latest available firmware for your device through OTA (over the air) from Settings-About Tablet-Software Update.

 

If your Galaxy Tab 2 7.0 P3100 already running on Android 4.2.2 Jelly Bean, then you can only expect few bug fixes and performance enhancement with this latest firmware update.

So, want to update your Galaxy Tab 2 7.0 P3100 to the latest XWDNA1 Android 4.2.2 Jelly Bean firmware? For official way, either you can go for OTA update or download firmware through the Samsung Kies utility. However, if you are looking for a manual way to update the latest Android 4.2.2 XWDNA1 firmware on your Galaxy Tab 2 7.0 P3100 through Odin then follow the step by step manual update guide below.

Important Note:

“The firmware is released only for the Samsung Galaxy Tab 2 7.0 GT-P3100 model, so don’t try this in any other android device. Check your device model number from Settings-About Tablet. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your Tablet”.

Android 4.2.2 Jelly Bean P3100XWDNA1 Official Firmware Download List

Samsung rolled out the firmware for the following countries. The firmware which are unbranded or not locked to any carrier, no matter of which country or region, can be flashed on any Galaxy Tab 2 7.0 GT-P3100 model.

Switzerland: P3100XWDNA1_P3100AUTDNA1_AUT.zip

[Firmware for rest of the countries and carrier will be added here when available]

Previous Firmware Build

Samsung Galaxy Pop E220S Android 4.1.2 Jelly Bean Firmware How to Install E220SKSANA2 Update Guide
Samsung Galaxy Hennessy SCH-W789 Flip Phone- How to Insta W789KEUANA1 Android 4.1.2 Jelly Bean Firmware

Pre-Requisites:

• Check battery percentage, your device should have at least 80% battery power
• Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
• Backup important data and settings to external storage- follow this guide
• Install USB driver for your device on your computer- Download Samsung USB Driver

Points to be noted:

• If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
• Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
• After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.

All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.2.2 P3100XWDNA1 official firmware on Galaxy Tab 2 7.0 P3100.

How to Install Android 4.2.2 Jelly Bean Official Firmware on Galaxy Tab 2 7.0 P3100 through Odin:

1. Download Android 4.2.2 XWDNA1 Firmware for Galaxy Tab 2 7.0 P3100 from the above list
2. Download Odin 3.09
3. Switch off your Tablet and boot Galaxy Tab 2 7.0 P3100 into Download Mode by pressing and holding the Volume Down and Power keys together until you get the warning message, now press Volume Up key to proceed to Download Mode..
4. Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
5. Now connect your Galaxy Tab 2 7.0 P3100 to your computer via USB cable
6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
8. Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
9. In Odin screen, click on PDA button and select the firmware file with .tar.md5 extension (The firmware file look something like: P3100XXDLJ5_P3100ODDDLI7_INU.tar.md5)
10. Now, click on the Start button to begin the installation process, wait few moments.
11. Once completed, you would see “PASS!” message in ID:COM port having green background
12. Your Tablet should automatically reboot after completion
13. You can now disconnect your Tablet from computer
14. Finish

So, you just completed the tutorial and your Galaxy Tab 2 7.0 P3100 is ready now with the latest available firmware.  Hope you successfully Update XWDNA1 Android 4.2.2 Jelly Bean official firmware on Galaxy Tab 2 7.0 GT-P3100. If you followed everything as mentioned in the above tutorial, then your device should now running on the latest Android 4.2.2 Jelly Bean build version XWDNA1. You can verify the firmware update details from Settings-About Tablet. For any queries feel free to contact with us any time and don’t forget to share your experience in the comment below.

Samsung Galaxy Tab 3 Kids SM-T2105- How to Install T2105UBANA1 Android 4.1.2 Jelly Bean Firmware

Samsung Galaxy Tab 3 Kids SM-T2105- How to Install T2105UBANA1 Android 4.1.2 Jelly Bean Firmware,T2105UBANA1 Android 4.1.2 Jelly Bean Firmware Last Updated on 26-Feb-2014. The Kids version of Samsung Galaxy Tab 3 Kids SM-T2105 recently received the UBANA1 4.1.2 Jelly Bean official firmware update. Samsung recently started rolled out an OTA update about the firmware. The latest firmware build version is T2105UBANA1. The device is running with Android 4.1.2 Jelly Bean from the release and not yet received any further android version. Samsung already released many regular firmware update for the device and here we have the latest available firmware for Galaxy Tab 3 Kids T2105. If you yet to update your device to this latest firmware then do it now by following the tutorial below. The below guide will help you to download and install the T2105UBANA1 Android 4.1.2 Jelly Bean Firmware manually through Odin. You can also check the latest available firmware for your device through OTA (over the air) from Settings-About Tablet-Software Update.

The Galaxy Tab 3 Kids T2105 was released with Android 4.1.2 Jelly Bean and yet to receive Android 4.2.2 Jelly Bean or later android version. As the device already running on the Android 4.1.2 Jelly Bean, you can only expect few bug fixes and performance enhancement with this latest firmware update.

So, want to update your Galaxy Tab 3 Kids T2105 to the latest UBANA1 Android 4.1.2 Jelly Bean firmware? For official way, either you can go for OTA update or download firmware through the Samsung Kies utility. However, if you are looking for a manual way to update the latest Android 4.1.2 UBANA1 firmware on your Galaxy Tab 3 Kids T2105 through Odin then follow the step by step manual update guide below.

Important Note:

“The firmware is released only for the Samsung Galaxy Tab 3 Kids SM-T2105 model, so don’t try this in any other android device. Check your device model number from Settings-About Tablet. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your Tablet”.

Android 4.1.2 Jelly Bean T2105UBANA1 Official Firmware Download List

Samsung rolled out the firmware for the following countries. The firmware which are unbranded or not locked to any carrier, no matter of which country or region, can be flashed on any Galaxy Tab 3 Kids SM-T2105 model.

Brazil: T2105UBANA1_T2105ZTOANA2_ZTO.zip  |  Link2
Trinidad and Tobago: TTT-T2105UBANA1-20140226134829.zip  |  Link2

[Firmware for rest of the countries and carrier will be added here when available]

Pre-Requisites:

• Check battery percentage, your device should have at least 80% battery power
• Turn on USB Debugging mode,
• go to Settings-Developer Options-USB Debugging
• Backup important data and settings to external storage- follow this guide
• Install USB driver for your device on your computer- Download Samsung USB Driver

Points to be noted:

• If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
• Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
• After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.

All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.1.2 T2105UBANA1 official firmware on Galaxy Tab 3 Kids T2105.

How to Install Android 4.1.2 Jelly Bean Official Firmware on Galaxy Tab 3 Kids T2105 through Odin:

1. Download Android 4.1.2 UBANA1 Firmware for Galaxy Tab 3 Kids T2105 from the above list
2. Download Odin 3.09
3. Switch off your Tablet and boot Galaxy Tab 3 Kids T2105 into Download Mode by pressing and holding the Volume Down and Power keys together until you get the warning message, now press Volume Up key to proceed to Download Mode..
4. Extract the downloaded Odin3.09 zip file and run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
5. Now connect your Galaxy Tab 3 Kids T2105 to your computer via USB cable
6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
8. Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
9. In Odin screen, click on AP button and select the firmware file with .tar.md5 extension (The firmware file look something like: T2105XXDLJ5_T2105ODDDLI7_INU.tar.md5)
10. Now, click on the Start button to begin the installation process, wait few moments.
11. Once completed, you would see “PASS!” message in ID:COM port having green background
12. Your Tablet should automatically reboot after completion
13. You can now disconnect your Tablet from computer
14. Finish

Congrats! you have completed the tutorial and your Galaxy Tab 3 Kids T2105 is now ready with the latest available firmware.  Hope you successfully update UBANA1 Android 4.1.2 Jelly Bean official firmware on Galaxy Tab 3 Kids SM-T2105. If you followed everything as mentioned in the above tutorial, then your device should now running on the latest Android 4.1.2 Jelly Bean build version UBANA1. You can verify the firmware update details from Settings-About Tablet. For any queries feel free to contact with us any time and don’t forget to share your experience in the comment below.

Samsung Galaxy S Advance GT-I9070- How to Install I9070UBLPK Android 4.1.2 Jelly Bean Firmware

Samsung Galaxy S Advance GT-I9070- How to Install I9070UBLPK Android 4.1.2 Jelly Bean Firmware,I9070UBLPK Android 4.1.2 Jelly Bean Firmware Last Updated on 26-Feb-2014. Owners of Samsung Galaxy S Advance GT-I9070 can now update their device with the latest official UBLPK Android 4.1.2 Jelly Bean firmware. Samsung started rolling out an OTA update about the firmware. The latest firmware build version is I9070UBLPK. The Galaxy S Advance is a mid range Android Smartphone by Samsung, released back  in the year January 2012 with Android 2.3.6 Gingerbread and started receiving Android 4.1.2 Jelly Bean firmware update from December 2012. Till now the device get many regular firmware update and here we have the latest available firmware for the device. If you own the device and not yet updated this latest firmware, then update the same using our simple tutorial below. The below guide will help you to download and install the I9070UBLPK Android 4.1.2 Jelly Bean Firmware manually through Odin. You can also check the latest available firmware for your device through OTA (over the air) from Settings-About Phone-Software Update.

If your Galaxy S Advance is already running on the Android 4.1.2 Jelly Bean, you can only expect few bug fixes and performance enhancement with this update. So, want to update your Galaxy S Advance I9070 to the latest UBLPK Android 4.1.2 Jelly Bean firmware? To install in official way, either you can go for OTA update as mentioned above or download firmware through the Samsung Kies utility. However, most of us prefer manual way to update official firmware. So, in this article you’ll find step by step manual guide to update the latest Android 4.1.2 UBLPK firmware on your Galaxy S Advance I9070 through Odin.

Important Note:

“The firmware is released only for the Samsung Galaxy S Advance GT-I9070 model, so don’t try this in any other android device. Check your device model number from Settings-About Phone. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your phone”.

Android 4.1.2 Jelly Bean I9070UBLPK Official Firmware Download List

Samsung rolled out the firmware for the following countries. The firmware which are unbranded or not locked to any carrier, no matter of which country or region, can be flashed on any Galaxy S Advance GT-I9070 model.

Argentina (Personal): I9070UBLPK_I9070PSNLP7_PSN.zip

[Firmware for rest of the countries and carrier will be added here when available]

Pre-Requisites:

• Check battery percentage, your device should have at least 60% battery power
• Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
• Backup important data and settings to external storage- follow this guide
• Install USB driver for your device on your computer- Download Samsung USB Driver

Points to be noted:

• If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
• Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
• After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.

All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.1.2 I9070UBLPK official firmware on Galaxy S Advance I9070.

How to Install Android 4.1.2 Jelly Bean Official Firmware on Galaxy S Advance I9070 through Odin:

1. Download Android 4.1.2 UBLPK Firmware for Galaxy S Advance I9070 from the above list
2. Download Odin 3.09
3. Switch off your phone and boot Galaxy S Advance I9070 into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
4. Extract the downloaded Odin3.09 zip file and run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
5. Now connect your Galaxy S Advance I9070 to your computer via USB cable
6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
8. Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
9. In Odin screen, click on AP button and select the firmware file with .tar.md5 extension (The firmware file look something like: I9070XXDLJ5_I9070ODDDLI7_INU.tar.md5)
10. Now, click on the Start button to begin the installation process, wait few moments.
11. Once completed, you would see “PASS!” message in ID:COM port having green background
12. Your phone should automatically reboot after completion
13. You can now disconnect your phone from computer
14. Finish

Congratulations! you have completed the tutorial to update Android 4.1.2 Jelly Bean official firmware on Galaxy S Advance GT-I9070. Hope you successfully done the update process. If you followed everything as mentioned in the above tutorial, then your Galaxy S Advance should now running on the latest Android 4.1.2 Jelly Bean build version UBLPK. You can confirm the firmware update details from Settings-About Phone. If you stuck in any point or find any issue with the download link, then feel free to contact with us using the comment form below.

Samsung Galaxy Fame GT-S6810B- How to Install S6810BVJANA1 Android 4.1.2 Jelly Bean Firmware

S6810BVJANA1 Android 4.1.2 Jelly Bean Firmware Last Updated on 26-Feb-2014. Samsung Galaxy Fame GT-S6810B users can now update their device with the latest official VJANA1 Android 4.1.2 Jelly Bean firmware. Samsung recently started rolling out an OTA update about the firmware. The latest firmware build version is S6810BVJANA1. The Galaxy Fame was released in the month of February 2013 with Android 4.1.2 Jelly Bean. Samsung is yet to release Android 4.2.2 Jelly Bean or any further android version for the device. If you own the device and not yet updated this latest firmware, then update the same using our simple tutorial below. The below guide will help you to download and install the S6810BVJANA1 Android 4.1.2 Jelly Bean Firmware manually through Odin. You can also check latest available firmware for your device through OTA (over the air) from Settings-About Phone-Software Update.

As the Galaxy Fame already running on the Android 4.1.2 Jelly Bean, you can only expect few bug fixes and performance enhancement with this update. So, want to update your Galaxy Fame S6810B to the latest VJANA1 Android 4.1.2 Jelly Bean firmware? To install in official way, either you can go for OTA update as mentioned above or download firmware through the Samsung Kies utility. However, most of us prefer manual way to update official firmware. So, in this article you’ll find step by step manual guide to update the latest Android 4.1.2 VJANA1 firmware on your Galaxy Fame S6810B through Odin.

Important Note:

“The firmware is released only for the Samsung Galaxy Fame GT-S6810B model, so don’t try this in any other android device. Check your device model number from Settings-About Phone. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your phone”.

Android 4.1.2 Jelly Bean S6810BVJANA1 Official Firmware Download List

Samsung rolled out the firmware for the following countries. The firmware which are unbranded or not locked to any carrier, no matter of which country or region, can be flashed on any Galaxy Fame GT-S6810B model.

Brazil (VIVO):
S6810BVJANA1_S6810BZVVANA1_ZVV.zip  |  ZVV-S6810BVJANA1-20140226112604.zip

[Firmware for rest of the countries and carrier will be added here when available]

Pre-Requisites:

• Check battery percentage, your device should have at least 60% battery power
• Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
• Backup important data and settings to external storage- follow this guide
• Install USB driver for your device on your computer- Download Samsung USB Driver

Points to be Noted:

• If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
• Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
• After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.

All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.1.2 S6810BVJANA1 official firmware on Galaxy Fame S6810B.

How to Install Android 4.1.2 Jelly Bean Official Firmware on Galaxy Fame S6810B through Odin:

1. Download Android 4.1.2 VJANA1 Firmware for Galaxy Fame S6810B from the above list
2. Download Odin 3.09
3. Switch off your phone and boot Galaxy Fame S6810B into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
4. Extract the downloaded Odin3.09 zip file and run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
5. Now connect your Galaxy Fame S6810B to your computer via USB cable
6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
8. Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
9. In Odin screen, click on AP button and select the firmware file with .tar.md5 extension (The firmware file look something like: S6810BXXDLJ5_S6810BODDDLI7_INU.tar.md5)
10. Now, click on the Start button to begin the installation process, wait few moments.
11. Once completed, you would see “PASS!” message in ID:COM port having green background
12. Your phone should automatically reboot after completion
13. You can now disconnect your phone from computer
14. Finish

Congrats! you have just completed the tutorial to update Android 4.1.2 Jelly Bean official firmware on Galaxy Fame GT-S6810B. Hope you successfully done the update process. If you followed everything as mentioned in the above tutorial, then your Galaxy Fame should now running on the latest Android 4.1.2 Jelly Bean build version VJANA1. You can confirm the firmware update details from Settings-About Phone. If you stuck in any point or find any issue with the download link, then feel free to contact with us using the comment form below.

Samsung Galaxy Note 2 GT-N7100- Simple Tutorial Root N7100UBDMH1 Android 4.1.2 Jelly Bean Firmware

Samsung Galaxy Note 2 GT-N7100- Simple Tutorial Root N7100UBDMH1 Android 4.1.2 Firmware,A simple method to root N7100UBDMH1 Android 4.1.2 Jelly Bean Firmware is now available at NasirTech. Samsung Galaxy Note 2 GT-N7100 recently get updated to the N7100UBDMH1 4.1.2 Jelly Bean Firmware. If you yet to update the firmware, then update the same by following the above link. Hope you updated this latest firmware on your device and now you can root the UBDMH1 firmware using our simple tutorial below. The below guide will help you to root N7100UBDMH1 4.1.2 Jelly Bean Firmware running on Galaxy Note 2 GT-N7100. Continue reading the tutorial for complete guide.
After updating official firmware, your device no longer belongs to rooted device. So, after official firmware update, many of us prefer to root our device to enjoy some additional features that unrooted android device doesn’t offer. With a rooted android device, you can install apps that ask root permission, flash various custom ROMs, install MODs and tweak various features. Root removes default bloatware apps that free-up lots of memory space and extend the battery life. However, once rooted, manufacturer warranty will be void. But you can regain the warranty by following proper unroot process. To know more about benefits of rooting android device, read- Complete Note on What is Rooting and Benefits of Rooting Android Phone.

So, want to root Galaxy Note 2 GT-N7100 Running N7100UBDMH1 4.1.2 Jelly Bean Firmware? Continue reading this page to get all the necessary steps to successfully root your device. The root file (CF-Auto-Root) we used in this tutorial is safe and have nearly 100% success rate. We’ll use Odin software to flash the root file.
The tutorial is made with simple step by step guide, so that even an android newbie user can follow and successfully root his/her device. However, in this process you may loss your personal data and settings. So, we recommend you to follow all the backup instructions before proceed to rooting guide.

Warning!

• This rooting tutorial is only applicable for Samsung Galaxy Note 2 GT-N7100 model (t03g). So, don’t try this in any other android device. Check your device model number from- Settings-About Phone.
• Rooting voids your phone’s manufacturer warranty. However, you can get back the warranty anytime by following proper unroot process or by flashing official firmware.
• This guide is for educational purpose and you should try this at your own risk. We are not responsible if your device experience a soft brick after following this tutorial.

Pre-Requisites:

• Check battery percentage, charge your device to a decent level of at least 60% battery power. Your device should not turn off during installation.
• Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
• Backup important data and settings to external storage- follow this guide
• Install USB driver for your device on your computer- Download Samsung USB Driver

All the above pre-requisites are very important and must be followed before proceed to installation guide. Hope you get all the above points and done as mentioned. Now, you are ready to move to the final step of this tutorial where we have arranged a step by step details guide to root Galaxy Note 2 GT-N7100 running  N7100UBDMH1 4.1.2 Jelly Bean firmware.

Steps to Root Galaxy Note 2 GT-N7100 Running N7100UBDMH1 4.1.2 Jelly Bean through Odin:

1. Download CF-Auto-Root for Galaxy Note 2 N7100 and extract the Zip file: CF-Auto-Root-t03g-t03gxx-gtn7100.zip
2. Download Odin 3.09 and extract the Zip file: Odin3_V3.09.Zip
3. Now, Switch off your phone and boot Galaxy Note 2 N7100 into Download Mode by pressing and holding the Volume Down+Home+Power buttons together (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
4. Run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
5. Now connect your Galaxy Note 2 N7100 to your computer via USB cable
6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
8. Now, click on the AP button and select the CF-Auto-Root-t03g-t03gxx-gtn7100.tar.md5 file.
9. Finally, click on the Start button to begin the rooting process, wait few moments.
10. Once completed, you would see “PASS!” message in ID:COM port having green background
11. Your phone should automatically reboot after completion
12. You can now disconnect your phone from computer
13. Finish

Congrats! You have completed the tutorial to root Galaxy Note 2 N7100 running N7100UBDMH1 4.1.2 Jelly Bean Firmware. Hope you successfully done the rooting process. If you followed everything as mentioned in the above tutorial, then your Galaxy Note 2 N7100 should now rooted and you have complete control over your device. Now, install apps that ask root permission or flash various custom ROMs. To verify your device is rooted or not, you can download and run the Root Checker App from Google Play Store. If you have any doubt or query about the tutorial, feel free to contact with us using the comment form below, and share your rooting experience with us.

Samsung Galaxy Note 3 SM-N900- How to Install N900XXUDNB2 Android 4.4.2 KitKat Firmware

Samsung Galaxy Note 3 SM-N900- How to Install N900XXUDNB2 Android 4.4.2 KitKat Firmwar,N900XXUDNB2 Android 4.4.2 KitKat Firmware Last Updated on 25-Feb-2014. You can now update the latest XXUDNB2 4.4.2 KitKat official firmware on Samsung Galaxy Note 3 SM-N900. Samsung recently started rolling out an OTA update about the firmware. The latest firmware build version is N900XXUDNB2. However, the firmware is currently released for Russia. Hope the firmware will hit other part of the world soon. The Galaxy Note 3 was released with Android 4.3 Jelly Bean and started received firmware update soon after the release. The device already get KitKat firmware update and here we have the latest official Android 4.4.2 KitKat firmware. If you own the device and yet to update this latest firmware, then update the same using our simple tutorial below. The below guide will help you to download and install the N900XXUDNB2 Android 4.4.2 KitKat Firmware manually through Odin.

Root N900XXUDNB2

Samsung Galaxy Note 3 SM-N900- Simple Tutorial Root N900XXUCMK2 Android 4.3 Jelly Bean Firmware

Android 4.4.2 KitKat is definitely a great update for the Samsung Galaxy Note 3 N900 users as they are eagerly waiting for great features that coming with this latest update.

 Android 4.4.2 KitKat comes with many new features than the previous Android 4.3 Jelly Bean, some includes- Camera shortcut on lockscreen, White icons in status bar, Performance improvements, Transparent status bar, Improved keyboard layout in landscape orientation, Select between the stock messaging app or Hangouts for SMS and MMS, Select between TouchWiz or other launchers through settings, Wireless printing, Updated Google apps and many more.
So, want to update your Galaxy Note 3 N900 to the latest XXUDNB2 Android 4.4.2 KitKat firmware? There are two official way to update the firmware, either check and update via   OTA (over the air) from your phone settings, go to Settings-General-About-Software Update or download and update through the Samsung Kies utility. However, if you are looking for a manual way to update the latest Android 4.4.2 XXUDNB2 firmware on your Galaxy Note 3 N900 via Odin, then follow this step by step tutorial.

Important Note:

“The firmware is released only for the Samsung Galaxy Note 3 SM-N900 model, so don’t try this in any other android device. Check your device model number from Settings-General-About. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your phone”.

Android 4.4.2 KitKat N900XXUDNB2 Official Firmware Download List

Samsung rolled out the firmware for the following countries. The firmware which are unbranded or not locked to any carrier, no matter of which country or region, can be flashed on any Galaxy Note 3 SM-N900 model.

Russia (MegaFon): N900XXUDNB2_N900MGFDNB3_MGF.zip
Russia: N900XXUDNB2_N900SERDNB2_SER.zip  |  Link2
Kazakhstan: N900XXUDNB2_N900OXEDNB2_SKZ.zip  |  Link2
Ukraine (Kyivstar): N900XXUDNB2_N900OXEDNB2_SEK.zip  |  Link2

[Firmware for rest of the countries will be added here when available]

Previous Firmware Build

Samsung Galaxy S4 GT-I9500- How to Install I9500XXUFNB3 Android 4.4.2 KitKat Firmware
Samsung Galaxy S4 GT-I9500- Simple Tutorial How to Root I9500 Android 4.4.2 KitKat Firmware
Samsung GT-I9500 Android 4.4.2 KitKat Firmware working firmware download now.
Samsung Galaxy Note 3 SM-N900- How to Install N900XXUDNA6 Android 4.4.2 KitKat Firmware.

Pre-Requisites:

• Check battery percentage, your device should have at least 60% battery power
• Turn on USB Debugging mode, go to Settings-General-Developer Options (As the Developer options are hidden by default on all Android device running on Android 4.2 or up, So go to Settings-General-About on your Galaxy Note 3 and tap Build Number for 7 times to visible the Developer options.) See the image above
• Backup important data and settings to external storage- follow this guide
• Install USB driver for your device on your computer- Download Samsung USB Driver

Points to be noted:

• If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
• Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
• After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.

All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.4.2 N900XXUDNB2 official firmware on Galaxy Note 3 N900.

How to Update Android 4.4.2 KitKat Official Firmware on Galaxy Note 3 N900 via Odin:

1. Download Android 4.4.2 XXUDNB2 Firmware for Galaxy Note 3 N900 from the above list
2. Download Odin 3.09
3. Switch off your phone and boot Galaxy Note 3 N900 into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
4. Extract the downloaded Odin3.09 zip file and run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
5. Now connect your Galaxy Note 3 N900 to your computer via USB cable
6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
8. Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
9. In Odin screen, click on AP button and select the firmware file with .tar.md5 extension (The firmware file look something like: N900XXDLJ5_N900ODDDLI7_INU.tar.md5)
10. Now, click on the Start button to begin the installation process, wait few moments.
11. Once completed, you would see “PASS!” message in ID:COM port having green background
12. Your phone should automatically reboot after completion
13. You can now disconnect your phone from computer
14. Finish

Congrats! You have finish updating your device. Hope you successfully completed the tutorial to update Android 4.4.2 KitKat XXUDNB2 official firmware on Galaxy Note 3 SM-N900. If you followed everything as mentioned in the above tutorial, then your device should now running on the latest Android 4.4.2 KitKat build version XXUDNB2. You can verify the firmware update details from Settings-General-About. If you have any queries, feel free to contact with us using the comment form below and also share how you find the tutorial.

Samsung Galaxy Note 2 GT-N7100- How to Install N7100UBDMH1 Android 4.1.2 Jelly Bean Firmware

Samsung Galaxy Note 2 GT-N7100- How to Install N7100UBDMH1 Android 4.1.2 Jelly Bean Firmware,N7100UBDMH1 Android 4.1.2 Jelly Bean Firmware Last Updated on 26-Feb-2014. Samsung Galaxy Note 2 GT-N7100 users can update their device with the UBDMH1 Android 4.1.2 Jelly Bean official firmware. Samsung started rolling out an OTA update about the firmware. The latest firmware build version is N7100UBDMH1. The Galaxy Note 2 N7100 receiving Android 4.1.2 Jelly Bean from February 2013 and here we have the latest 4.1.2 firmware for the device. If you yet to update your device to this latest firmware then update the same using our simple tutorial below. The below guide will help you to download and install the N7100UBDMH1 Android 4.1.2 Jelly Bean Firmware manually through Odin. You can also check latest available firmware for your device through OTA (over the air) from Settings-About Phone-Software Update.

Root N7100UBDMH1

Samsung Galaxy Star Pro GT-S7262- How to Install S7262XXUANB1 Android 4.1.2 Jelly Bean Firmware

If your Galaxy Note 2 N7100 already running on Android 4.1.2 Jelly Bean, you can only expect few bug fixes and performance enhancement with this latest update.

So, want to update your Galaxy Note 2 N7100 to the latest UBDMH1 Android 4.1.2 Jelly Bean firmware? For official way, either you can go for OTA update or download firmware through the Samsung Kies utility. However, most of us prefer manual way to update official firmware. So, in this article you’ll find step by step manual guide to update the latest Android 4.1.2 UBDMH1 firmware on your Galaxy Note 2 N7100 through Odin.

Important Note:

“The firmware is released only for the Samsung Galaxy Note 2 GT-N7100 model, so don’t try this in any other android device. Check your device model number from Settings-About Phone. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your phone”.

Android 4.1.2 Jelly Bean N7100UBDMH1 Official Firmware Download List

Samsung rolled out the firmware for the following countries. The firmware which are unbranded or not locked to any carrier, no matter of which country or region, can be flashed on any Galaxy Note 2 GT-N7100 model.
Argentina (Movistar): N7100UBDMH1_N7100TFGDMH1_UFN.zip
Argentina: N7100UBDMH1_N7100UWMDMH1_TGP.zip
Uruguay: N7100UBDMH1_N7100UUBDMH2_UPO.zip
Argentina (Personal): N7100UBDMH1_N7100PSNDMH2_PSN.zip
Dominican Republic (Orange): N7100UBDMH1_N7100DORDMH1_DOR.zip
Android official firmware here see all update model
[Firmware for rest of the countries and carrier will be added here when available]

Pre-Requisites:

• Check battery percentage, your device should have at least 60% battery power
• Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
• Backup important data and settings to external storage- follow this guide
• Install USB driver for your device on your computer- Download Samsung USB Driver

Points to be noted:

• If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
• Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
• After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.

All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.1.2 N7100UBDMH1 official firmware on Galaxy Note 2 N7100.

How to Install Android 4.1.2 Jelly Bean Official Firmware on Galaxy Note 2 N7100 through Odin:

1. Download Android 4.1.2 UBDMH1 Firmware for Galaxy Note 2 N7100 from the above list
2. Download Odin 3.09
3. Switch off your phone and boot Galaxy Note 2 N7100 into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
4. Extract the downloaded Odin3.09 zip file and run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
5. Now connect your Galaxy Note 2 N7100 to your computer via USB cable
6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
8. Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
9. In Odin screen, click on AP button and select the firmware file with .tar.md5 extension (The firmware file look something like: N7100XXDLJ5_N7100ODDDLI7_INU.tar.md5)
10. Now, click on the Start button to begin the installation process, wait few moments.
11. Once completed, you would see “PASS!” message in ID:COM port having green background
12. Your phone should automatically reboot after completion
13. You can now disconnect your phone from computer
14. Finish

Congrats! you have just finished the tutorial to update Android 4.1.2 Jelly Bean official firmware on Galaxy Note 2 GT-N7100. Hope you successfully completed the update process. If you followed everything as mentioned in the above tutorial, then your device should now running on the latest Android 4.1.2 Jelly Bean build version UBDMH1. You can verify the firmware update details from Settings-About Phone. So, enjoy all the new features and improvements on your device and don’t forget to share your experience in the comment below.

Samsung Galaxy Tab 3 10.1 GT-P5200- How to Install P5200XXUANB2 Android 4.2.2 Jelly Bean Firmware

Samsung Galaxy Tab 3 10.1 GT-P5200- How to Install P5200XXUANB2 Android 4.2.2 Jelly Bean Firmware,P5200XXUANB2 Android 4.2.2 Jelly Bean Firmware Last Updated on 26-Feb-2014. Samsung Galaxy Tab 3 10.1 GT-P5200 (3G+WiFi) recently received the latest XXUANB2 Android 4.2.2 Jelly Bean official firmware. Samsung recently rolled out an OTA update about the firmware. However, the firmware is out for Italy. Hope the firmware will hit other part of the world soon. The Galaxy Tab 3 10.1 P5200 was released with Android 4.2.2 Jelly Bean out of the box and there is no news about any further android version update for the device. Here we have the latest available firmware for the tablet. If you own the device and not yet updated this latest available firmware then do it now by following the tutorial below. The below guide will help you to download and install the P5200XXUANB2 Android 4.2.2 Jelly Bean firmware manually through Odin.

The Galaxy Tab 3 10.1 P5200 was released back in the year 2013 with Android 4.2.2 Jelly Bean and yet to receive Android 4.3 Jelly Bean or later android version. As the device already running on the Android 4.2.2 Jelly Bean, you can only expect few bug fixes and performance enhancement with this latest firmware update.

So, want to update your Galaxy Tab 3 10.1 P5200 to the latest XXUANB2 Android 4.2.2 Jelly Bean firmware? For official way, either you can go for  OTA (over the air) from Settings-About Tablet-Software Update or download firmware through the Samsung Kies utility. However, if you are looking for a manual way to update the latest Android 4.2.2 XXUANB2 firmware on your Galaxy Tab 3 10.1 P5200 through Odin then follow the step by step manual update guide below.

Important Note:

“The firmware is released only for the Samsung Galaxy Tab 3 10.1 GT-P5200 model, so don’t try this in any other android device. Check your device model number from Settings-About Tablet. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your Tablet”.

Android 4.2.2 Jelly Bean P5200XXUANB2 Official Firmware Download List

Samsung rolled out the firmware for the following countries. The firmware which are unbranded or not locked to any carrier, no matter of which country or region, can be flashed on any Galaxy Tab 3 10.1 GT-P5200 model.

Italy:
P5200XXUANB2_P5200ITVANB2_ITV.zip  |  ITV-P5200XXUANB2-20140225154932.zip

[Firmware for rest of the countries and carrier will be added here when available]

Previous Firmware Build:

Samsung Galaxy S4 GT-I9500- Simple Tutorial How to Root I9500XXUFNB3 Android 4.4.2 KitKat Firmware

Samsung GT-I9500 Android 4.4.2 KitKat Firmware Download I9500XXUFNB3 for Russia SER working firmware download now.

Samsung Galaxy Note 3 SM-N900- How to Install N900XXUDNA6 Android 4.4.2 KitKat Firmware.

Samsung GT-I9500 India INU- Android 4.4.2 Official Firmware Update guide

Pre-Requisites:

• Check battery percentage, your device should have at least 80% battery power
• Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
• Backup important data and settings to external storage- follow this guide
• Install USB driver for your device on your computer- Download Samsung USB Driver

Points to be noted:

• If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
• Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
• After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.

All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.2.2 P5200XXUANB2 official firmware on Galaxy Tab 3 10.1 P5200.

How to Install Android 4.2.2 Jelly Bean Official Firmware on Galaxy Tab 3 10.1 P5200 through Odin:

1. Download Android 4.2.2 XXUANB2 Firmware for Galaxy Tab 3 10.1 P5200 from the above list
2. Download Odin 3.09
3. Switch off your Tablet and boot Galaxy Tab 3 10.1 P5200 into Download Mode by pressing and holding the Volume Down and Power keys together until you get the warning message, now press Volume Up key to proceed to Download Mode..
4. Extract the downloaded Odin3.09 zip file and run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
5. Now connect your Galaxy Tab 3 10.1 P5200 to your computer via USB cable
6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
8. Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
9. In Odin screen, click on AP button and select the firmware file with .tar.md5 extension (The firmware file look something like: P5200XXDLJ5_P5200ODDDLI7_INU.tar.md5)
10. Now, click on the Start button to begin the installation process, wait few moments.
11. Once completed, you would see “PASS!” message in ID:COM port having green background
12. Your Tablet should automatically reboot after completion
13. You can now disconnect your Tablet from computer
14. Finish

Congrats! Your Galaxy Tab 3 10.1 P5200 is ready now with the latest available firmware.  Hope you successfully update XXUANB2 Android 4.2.2 Jelly Bean official firmware on Galaxy Tab 3 10.1 GT-P5200. If you followed everything as mentioned in the above tutorial, then your device should now running on the latest Android 4.2.2 Jelly Bean build version XXUANB2. You can verify the firmware update details from Settings-About Tablet. For any queries feel free to contact with us any time and don’t forget to share your experience in the comment below.

Samsung Galaxy Star Pro GT-S7262- How to Install S7262XXUANB1 Android 4.1.2 Jelly Bean Firmware

Samsung Galaxy Star Pro GT-S7262- How to Install S7262XXUANB1 Android 4.1.2 Jelly Bean Firmware,S7262XXUANB1 Android 4.1.2 Jelly Bean Firmware Last Updated on 26-Feb-2014. Samsung Galaxy Star Pro GT-S7262 recently received a new official firmware update which is XXUANB1 Android 4.1.2 Jelly Bean. Samsung started rolling out an OTA update about the firmware. The latest firmware build version is S7262XXUANB1. However, the firmware is currently out for Nepal. Hope the firmware will hit other part of the world soon. The Galaxy Star Pro is a low range Android Smartphone by Samsung, released with Android 4.1.2 Jelly Bean. The device already received many regular firmware update and here we have the latest available firmware for the device. If you own the Smartphone and not yet updated this latest firmware, then update the same using our simple tutorial below. The below guide will help you to download and install the S7262XXUANB1 Android 4.1.2 Jelly Bean Firmware manually through Odin.

As the Galaxy Star Pro released with the Android 4.1.2 Jelly Bean and not yet get Android 4.2.2 Jelly Bean or later android version, you can only expect few bug fixes and performance enhancement with this update. So, want to update your Galaxy Star Pro S7262 to the latest XXUANB1 Android 4.1.2 Jelly Bean firmware? To install in official way, either you can go for  OTA (over the air) from Settings-About Phone-Software Update or download firmware through the Samsung Kies utility. However, most of us prefer manual way to update official firmware. So, in this article you’ll find step by step manual guide to update the latest Android 4.1.2 XXUANB1 firmware on your Galaxy Star Pro S7262 through Odin.

Important Note:

“The firmware is released only for the Samsung Galaxy Star Pro GT-S7262 model, so don’t try this in any other android device. Check your device model number from Settings-About Phone. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your phone”.

Android 4.1.2 Jelly Bean S7262XXUANB1 Official Firmware Download List

Samsung rolled out the firmware for the following countries. The firmware which are unbranded or not locked to any carrier, no matter of which country or region, can be flashed on any Galaxy Star Pro GT-S7262 model.

Nepal: NPL-S7262XXUANB1-20140226104403.zip

[Firmware for rest of the countries and carrier will be added here when available]

Previous Firmware Build

Samsung Galaxy S4 GT-I9500- Simple Tutorial How to Root I9500XXUFNB3 Android 4.4.2 KitKat Firmware

Samsung GT-I9500 Android 4.4.2 KitKat Firmware Download I9500XXUFNB3 for Russia SER working firmware download now.

Samsung Galaxy Note 3 SM-N900- How to Install N900XXUDNA6 Android 4.4.2 KitKat Firmware.

Samsung GT-I9500 India INU- Android 4.4.2 Official Firmware Update guide

Pre-Requisites:

• Check battery percentage, your device should have at least 60% battery power
• Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
• Backup important data and settings to external storage- follow this guide
• Install USB driver for your device on your computer- Download Samsung USB Driver

Points to be noted:

• If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
• Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
• After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.

All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.1.2 S7262XXUANB1 official firmware on Galaxy Star Pro S7262.

How to Install Android 4.1.2 Jelly Bean Official Firmware on Galaxy Star Pro S7262 through Odin:

1. Download Android 4.1.2 XXUANB1 Firmware for Galaxy Star Pro S7262 from the above list
2. Download Odin 3.09
3. Switch off your phone and boot Galaxy Star Pro S7262 into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
4. Extract the downloaded Odin3.09 zip file and run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
5. Now connect your Galaxy Star Pro S7262 to your computer via USB cable
6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
8. Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
9. In Odin screen, click on AP button and select the firmware file with .tar.md5 extension (The firmware file look something like: S7262XXDLJ5_S7262ODDDLI7_INU.tar.md5)
10. Now, click on the Start button to begin the installation process, wait few moments.
11. Once completed, you would see “PASS!” message in ID:COM port having green background
12. Your phone should automatically reboot after completion
13. You can now disconnect your phone from computer
14. Finish

Congrats! you have complete the tutorial to update Android 4.1.2 Jelly Bean official firmware on Galaxy Star Pro GT-S7262. Hope you successfully done the update process. If you followed everything as mentioned in the above tutorial, then your Galaxy Star Pro should now running on the latest Android 4.1.2 Jelly Bean build version XXUANB1. You can confirm the firmware update details from Settings-About Phone. If you stuck in any point or find any issue with the download link, then feel free to contact with us using the comment form below.

Samsung Galaxy Note 3 SM-N900- Simple Tutorial Root N900XXUCMK2 Android 4.3 Jelly Bean Firmware

Samsung Galaxy Note 3 SM-N900- Simple Tutorial Root N900XXUCMK2 Android 4.3 Jelly Bean Firmware,A simple method to root N900XXUCMK2 Android 4.3 Jelly Bean Firmware is now available at NasirTech. Samsung Galaxy Note 3 SM-N900 recently get updated to the N900XXUCMK2 4.3 Jelly Bean Firmware. If you yet to update the firmware, then update the same by following the above link. Hope you updated this latest firmware on your device and now you can root the XXUCMK2 firmware using our simple tutorial below. The below guide will help you to root N900XXUCMK2 4.3 Jelly Bean Firmware running on Galaxy Note 3 SM-N900. Continue reading the tutorial for complete guide.
After updating official firmware, your device no longer belongs to rooted device. So, after official firmware update, many of us prefer to root our device to enjoy some additional features that unrooted android device doesn’t offer. With a rooted android device, you can install apps that ask root permission, flash various custom ROMs, install MODs and tweak various features. Root removes default bloatware apps that free-up lots of memory space and extend the battery life. However, once rooted, manufacturer warranty will be void. But you can regain the warranty by following proper unroot process. To know more about benefits of rooting android device, read- Complete Note on What is Rooting and Benefits of Rooting Android Phone.

So, want to root Galaxy Note 3 SM-N900 Running N900XXUCMK2 4.3 Jelly Bean Firmware? Continue reading this page to get all the necessary steps to successfully root your device. The root file (CF-Auto-Root) we used in this tutorial is safe and have nearly 100% success rate. We’ll use Odin software to flash the root file.
The tutorial is made with simple step by step guide, so that even an android newbie user can follow and successfully root his/her device. However, in this process you may loss your personal data and settings. So, we recommend you to follow all the backup instructions before proceed to rooting guide.

Warning!

• This rooting tutorial is only applicable for Samsung Galaxy Note 3 SM-N900 model (ha3g). So, don’t try this in any other android device. Check your device model number from- Settings-About Phone.
• Rooting voids your phone’s manufacturer warranty. However, you can get back the warranty anytime by following proper unroot process or by flashing official firmware.
• This guide is for educational purpose and you should try this at your own risk. We are not responsible if your device experience a soft brick after following this tutorial.

Pre-Requisites:

• Check battery percentage, charge your device to a decent level of at least 60% battery power. Your device should not turn off during installation.
• Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
• Backup important data and settings to external storage- follow this guide
• Install USB driver for your device on your computer- Download Samsung USB Driver

All the above pre-requisites are very important and must be followed before proceed to installation guide. Hope you get all the above points and done as mentioned. Now, you are ready to move to the final step of this tutorial where we have arranged a step by step details guide to root Galaxy Note 3 SM-N900 running  N900XXUCMK2 4.3 Jelly Bean firmware.

Steps to Root Galaxy Note 3 SM-N900 Running N900XXUCMK2 4.3 Jelly Bean through Odin:

 

1. Download CF-Auto-Root for Galaxy Note 3 N900 and extract the Zip file: CF-Auto-Root-t03g-t03gxx-gtN900.zip
2. Download Odin 3.09 and extract the Zip file: Odin3_V3.09.Zip
3. Now, Switch off your phone and boot Galaxy Note 3 N900 into Download Mode by pressing and holding the Volume Down+Home+Power buttons together (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
4. Run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
5. Now connect your Galaxy Note 3 N900 to your computer via USB cable
6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
8. Now, click on the AP button and select the CF-Auto-Root-t03g-t03gxx-gtN900.tar.md5 file.
9. Finally, click on the Start button to begin the rooting process, wait few moments.
10. Once completed, you would see “PASS!” message in ID:COM port having green background
11. Your phone should automatically reboot after completion
12. You can now disconnect your phone from computer
13. Finish

Congrats! You have completed the tutorial to root Galaxy Note 3 N900 running N900XXUCMK2 4.3 Jelly Bean Firmware. Hope you successfully done the rooting process. If you followed everything as mentioned in the above tutorial, then your Galaxy Note 3 N900 should now rooted and you have complete control over your device. Now, install apps that ask root permission or flash various custom ROMs. To verify your device is rooted or not, you can download and run the Root Checker App from Google Play Store. If you have any doubt or query about the tutorial, feel free to contact with us using the comment form below, and share your rooting experience with us.

Samsung Galaxy Music Duos GT-S6012B- How to Install S6012BVJUBMH1 Android 4.1.2 Jelly Bean Firmware

Samsung Galaxy Music Duos GT-S6012B- How to Install S6012BVJUBMH1 Android 4.1.2 Jelly Bean Firmware,S6012BVJUBMH1 Android 4.1.2 Jelly Bean Firmware Last Updated on 26-Feb-2014. Samsung Galaxy Music Duos GT-S6012B can now be updated with the latest official VJUBMH1 Android 4.1.2 Jelly Bean firmware. Samsung recently started rolling out an OTA update about the firmware. The latest firmware build version is S6012BVJUBMH1. The Galaxy Music Duos was released with Android 4.0.4 ICS (Ice Cream Sandwich) and receiving Android 4.1.2 Jelly Bean from the middle of year 2013. Samsung is yet to release Android 4.2.2 Jelly Bean or any further android version for the device. If you own the device and not yet updated this latest firmware, then update the same using our simple tutorial below. The below guide will help you to download and install the S6012BVJUBMH1 Android 4.1.2 Jelly Bean Firmware manually through Odin.

 

If your Galaxy Music Duos already running on the Android 4.1.2 Jelly Bean, you can only expect few bug fixes and performance enhancement with this update. So, want to update your Galaxy Music Duos S6012B to the latest VJUBMH1 Android 4.1.2 Jelly Bean firmware? To install in official way, either you can go for  OTA (over the air) from Settings-About Phone-Software Update or download firmware through the Samsung Kies utility. However, most of us prefer manual way to update official firmware. So, in this article you’ll find step by step manual guide to update the latest Android 4.1.2 VJUBMH1 firmware on your Galaxy Music Duos S6012B through Odin.

Important Music:

“The firmware is released only for the Samsung Galaxy Music Duos GT-S6012B model, so don’t try this in any other android device. Check your device model number from Settings-About Phone. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your phone”.

Android 4.1.2 Jelly Bean S6012BVJUBMH1 Official Firmware Download List

Samsung rolled out the firmware for the following countries. The firmware which are unbranded or not locked to any carrier, no matter of which country or region, can be flashed on any Galaxy Music Duos GT-S6012B model.

Trinidad and Tobago: TTT-S6012BVJUBMH1-20140225160922.zip

[Firmware for rest of the countries and carrier will be added here when available]

Pre-Requisites:

• Check battery percentage, your device should have at least 60% battery power
• Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
• Backup important data and settings to external storage- follow this guide
• Install USB driver for your device on your computer- Download Samsung USB Driver

Points to be noted:

• If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
• Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
• After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.

All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.1.2 S6012BVJUBMH1 official firmware on Galaxy Music Duos S6012B.

How to Install Android 4.1.2 Jelly Bean Official Firmware on Galaxy Music Duos S6012B through Odin:

1. Download Android 4.1.2 VJUBMH1 Firmware for Galaxy Music Duos S6012B from the above list
2. Download Odin 3.09
3. Switch off your phone and boot Galaxy Music Duos S6012B into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
4. Extract the downloaded Odin3.09 zip file and run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
5. Now connect your Galaxy Music Duos S6012B to your computer via USB cable
6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
8. Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
9. In Odin screen, click on AP button and select the firmware file with .tar.md5 extension (The firmware file look something like: S6012BXXDLJ5_S6012BODDDLI7_INU.tar.md5)
10. Now, click on the Start button to begin the installation process, wait few moments.
11. Once completed, you would see “PASS!” message in ID:COM port having green background
12. Your phone should automatically reboot after completion
13. You can now disconnect your phone from computer
14. Finish

Congrats! you have just completed the tutorial to update Android 4.1.2 Jelly Bean official firmware on Galaxy Music Duos GT-S6012B. Hope you successfully done the update process. If you followed everything as mentioned in the above tutorial, then your Galaxy Music Duos should now running on the latest Android 4.1.2 Jelly Bean build version VJUBMH1. You can confirm the firmware update details from Settings-About Phone. If you stuck in any point or find any issue with the download link, then feel free to contact with us using the comment form below.

Samsung Galaxy S3 GT-I9300- Simple Tutorial Root I9300UBUGML2 Android 4.3 Firmware

Samsung Galaxy S3 GT-I9300- Simple Tutorial Root I9300UBUGML2 Android 4.3 Firmware,A simple method to root I9300UBUGML2 Android 4.3 Jelly Bean Firmware is now available at NasirTech. Samsung Galaxy S3 GT-I9300 recently get updated to the I9300UBUGML2 4.3 Jelly Bean Firmware. If you yet to update the firmware, then update the same by following the above link. Hope you updated this latest firmware on your device and now you can root the UBUGML2 firmware using our simple tutorial below. The below guide will help you to root I9300UBUGML2 4.3 Jelly Bean Firmware running on Galaxy S3 GT-I9300. Continue reading the tutorial for complete guide.
After updating official firmware, your device no longer belongs to rooted device. So, after official firmware update, many of us prefer to root our device to enjoy some additional features that unrooted android device doesn’t offer. With a rooted android device, you can install apps that ask root permission, flash various custom ROMs, install MODs and tweak various features. Root removes default bloatware apps that free-up lots of memory space and extend the battery life. However, once rooted, manufacturer warranty will be void. But you can regain the warranty by following proper unroot process. To know more about benefits of rooting android device, read- Complete Note on What is Rooting and Benefits of Rooting Android Phone.

So, want to root Galaxy S3 GT-I9300 Running I9300UBUGML2 4.3 Jelly Bean Firmware? Continue reading this page to get all the necessary steps to successfully root your device. The root file (CF-Auto-Root) we used in this tutorial is safe and have nearly 100% success rate. We’ll use Odin software to flash the root file.
The tutorial is made with simple step by step guide, so that even an android newbie user can follow and successfully root his/her device. However, in this process you may loss your personal data and settings. So, we recommend you to follow all the backup instructions before proceed to rooting guide.

Warning!

• This rooting tutorial is only applicable for Samsung Galaxy S3 GT-I9300 model (m0). So, don’t try this in any other android device. Check your device model number from- Settings-About Phone.
• Rooting voids your phone’s manufacturer warranty. However, you can get back the warranty anytime by following proper unroot process or by flashing official firmware.
• This guide is for educational purpose and you should try this at your own risk. We are not responsible if your device experience a soft brick after following this tutorial.

Pre-Requisites:

• Check battery percentage, charge your device to a decent level of at least 60% battery power. Your device should not turn off during installation.
• Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
• Backup important data and settings to external storage- follow this guide
• Install USB driver for your device on your computer- Download Samsung USB Driver

All the above pre-requisites are very important and must be followed before proceed to installation guide. Hope you get all the above points and done as mentioned. Now, you are ready to move to the final step of this tutorial where we have arranged a step by step details guide to root Galaxy S3 GT-I9300 running  I9300UBUGML2 4.3 Jelly Bean firmware.

Steps to Root Galaxy S3 GT-I9300 Running I9300UBUGML2 4.3 Jelly Bean through Odin:

1. Download CF-Auto-Root for Galaxy S3 I9300 and extract the Zip file: CF-Auto-Root-m0-m0xx-gti9300.zip
2. Download Odin 3.09 and extract the Zip file: Odin3_V3.09.Zip
3. Now, Switch off your phone and boot Galaxy S3 I9300 into Download Mode by pressing and holding the Volume Down+Home+Power buttons together (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
4. Run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
5. Now connect your Galaxy S3 I9300 to your computer via USB cable
6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
8. Now, click on the AP button and select the CF-Auto-Root-m0-m0xx-gti9300.tar.md5 file.
9. Finally, click on the Start button to begin the rooting process, wait few moments.
10. Once completed, you would see “PASS!” message in ID:COM port having green background
11. Your phone should automatically reboot after completion
12. You can now disconnect your phone from computer
13. Finish

Congrats! You have completed the tutorial to root Galaxy S3 I9300 running I9300UBUGML2 4.3 Jelly Bean Firmware. Hope you successfully done the rooting process. If you followed everything as mentioned in the above tutorial, then your Galaxy S3 I9300 should now rooted and you have complete control over your device. Now, install apps that ask root permission or flash various custom ROMs. To verify your device is rooted or not, you can download and run the Root Checker App from Google Play Store. If you have any doubt or query about the tutorial, feel free to contact with us using the comment form below, and share your rooting experience with us.