All Mobile Solution

Samsung "GT-E3300" Unlock Solved

ModeL

Samsung "GT-E3300"

Status

Need to Unlock, Provider Lock From Vodafone

Phone Before

Tool's

Uart Cable C3303
Samsung Z3x

Unlocking Procedure

Open Samsung 2G Tool v 3.5.0040
Choose ModeL S5270
Insert uart cable to phone
Click Read Info [ codes ]
Last insert Battery

After Insert Battery, Phone now is (Tat Mode)
Read Info [ codes ] & Enter [ NET Lock code ]
Phone Now is (Unlock)

Samsung GALAXY Y (young) GT-S5360 Samsung logo only done via Odin

Status

Tools

Odin 1.85
File

1st Procedure Hard Reset but no lock

Press VOLUME UP + HOME + POWER and wait until the phone enter the Android System Recovery then select wipe date/factory reset & wipe cache partition

Procedure

1) Turn off your phone
2) Remove your SIM Card and SD Card
3) Extract previously downloaded firmware
4) Open ODIN 1.85 on your PC
5) Select from extracted archive: OPS-OPS, Bootloader, Phone-MODEM, PDA-CODE, CSC-CSC (leave EFS and One Package empty)

6) Connect your phone via USB into PC
7) When the screen is turned on hold POWER+VOLUME DOWN+HOME and wait until the phone enters the Download Mode

8) If ODIN detected and recognized your phone should light up the first square to the left side
9) Press “Start” button and wait, the process should take ~5 minutes

10) If all goes well your phone should reboot automatically
11) Square should change the color to blue and display “PASS” it means that flashing process was successful

Logs

Code:

<ID:0/018> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> DefaultCalDataWithBoot_S5360XXKI6_REV05.tar.md5 is valid.
<OSM> PDA_S5360XXKI6_REV05.tar.md5 is valid.
<OSM> MODEM_S5360XXKI6_REV05.tar.md5 is valid.
<OSM> GT-S5360-MULTI-CSC-OXXKI6.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/018> Odin v.3 engine (ID:18)..
<ID:0/018> File analysis..
<ID:0/018> SetupConnection..
<ID:0/018> Initialzation..
<ID:0/018> Set PIT file..
<ID:0/018> DO NOT TURN OFF TARGET!!
<ID:0/018> Get PIT for mapping..
<ID:0/018> Firmware update start..
<ID:0/018> BcmBoot.img
<ID:0/018> NAND Write Start!! 
<ID:0/018> HEDGE_NVRAM8_RF_LE.bin
<ID:0/018> sysparm_dep.img
<ID:0/018> Sbl.bin
<ID:0/018> boot.img
<ID:0/018> system.img
<ID:0/018> userdata.img
<ID:0/018> param.lfs
<ID:0/018> BcmCP.img
<ID:0/018> Transmission Complete.. 
<ID:0/018> Now Writing.. Please wait about 2 minutes
<ID:0/018> Receive Response form LOKE
<ID:0/018> csc.rfs
<ID:0/018> RQT_CLOSE !!
<ID:0/018> RES OK !!
<ID:0/018> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/018> Removed!!

My Finish Product

Before rooting, please charge your A90S to at least 70% battery level. Also disable all antivirus programs (if you are using any).once done, you can proceed further with complete guide which is mentioned below:

1. Download Bin4ry tool kit and all driver to your computer.

2. After downloading kits, connect your A90S with computer via USB cable.

3. Unzip Bin4ry kit and open the extracted file.

4. Now check for RunMe.bat file in extracted folder. Run this file.

5. Now you will get an on screen guide which will guide you through a prompt window.

6. Simply follow all the instructions.

7. After following all the instruction, your device will get rooted for new recovery and ROMs.

8. Wait for the command prompt to show “Process Completed” message.

Now disconnect USB cable and enjoy rooted A90S.

Please note: that if you are facing any problems then simply remove OFF the battery and repeat all the steps again.

Download and extract this zip file: Root_script_by_Bin4ry_v17.zip

Enable USB debugging on your Micromax A89 Ninja. (Go to Settings > Developer Options > Check mark “USB Debugging” and then tap OK button.

Now connect your Micromax A89 Ninja to your computer using your USB cable. The drivers should be installed automatically

Change the mode of your device from USB storage to Media Device and then proceed further. This option appears only when you connect your device to your PC.

Go to the folder named “Root_with_Restore_by_Bin4ry_v18″ and run the “Runme.bat” file.

Now, you should see a screen popping up on your monitor with words all in green *cue matrix themed music* and it looks a whole lot like CMD.

Choose the Normal mode by typing ‘1‘ and hit Enter from your keyboard.

Follow the on-screen instructions to complete the A89 Ninja rooting process. Your will reboot during the process after which Bin4ry will copy some files to your device.

When your phone is back ON, you should find the superuser SU app in your app drawer. If it’s there, ( whoopee!!! ), your Micromax A89 Ninja has been rooted! But then, if you want to check and be doubly sure, you could download The Root Checker App and check it for yourself.

How to root micromax a89

pre-requierments:

#1.First of all Download Java from above link & Install it normally. #2. Now Download Android-SDK, & Install it.

After installing android-sdk, goto that folder where you have installed it.
There you will find a ‘sdk manager‘, Open it.
A popup will appear, from there select “Android-sdk-Platform-Tools” & “Google-usb-Driver“, unselect the rest. Click install packages.
After it get installed, & download “adb_usb.ini” file from above link & put it in this location of your Pc >> “C:\User\(your pc name)\.android“

#3. Enable Usb Debugging in your phone by going to Setting>>Application>>Development>>Enable Usb Debugging …
#4. Now Install the Micromax A87 Driver . This Step 3 should be done very carefully, read the guide on How to Install Driver in Windows from my Forum.
#5. Download & Install Unlock Root from the above link.
#6.Open it & click on Green Big Root Button.

7) It will ask for the device, select Micromax a87 & you are done.

Note: Though the preccess is little hard,so carefully read all article twice befor proced,nither gsmhostin nor me respondable about any damages if happens

Note : you need to root first your device to flash clockworkrecovery in your phone

#1. First of all Download the Recovery File
#2. Rename that file to recovery.img
#3. Transfer the renamed file to your phone’s SD card.
#4. Download MobileUncleTool.apk from Google Play on your Micromax A110 and install it.
#5. Open the MTK Tools App.
#6. Select the Recovery Update option, now choose the recovery.img that you have just transferred to your Micromax A110 Canvas 2.
#7. The app will flash CWM recovery on your A110 now.

Before you proceed

Turn USB debugging on.
Make sure you’ve more than 75% battery.
Neither androidplus nor author is responsible for any kind of damage that may cause by following these steps.
Rooting voids your device warranty.

Download following

Bin4ry’s Rooting Tool

Root Micromax A90S

Install the drivers for your device using pdanet.
Connect the device to your laptop/ PC via USB cable.
Unzip the root tool you downloaded from downloads section.
Run the RunMe.bat file from there.
Now do as you are instructed to in the command prompt window you just opened.
Within no time, you will be having a rooted phone!
Don’t disconnect your device until the command window shows that the process has been completed successfully.

Step by Step Guide to install clockworkmod recovery on Micromax A90S

Download the recovery in .img file from the link above.
Copy the recovery.img file to the root of your sdcard(Don’t place it inside any folder).
Install MobileUncle MTK Tools, a toolbox for mediatek devices, from the play store.
The application is in Chinese, you might have some problem going through it. Still, find an option to “Update Recovery”.
It will ask the location of the img file you want to flash. Point it to the file you pasted in your sdcard in step2.
Your phone should reboot now.
That’s it.

clockworkrecovery image